The main Jaeger backend components are released as Docker images on Docker Hub  and Quay :

The images listed above are the primary release versions. Most components have additional images published:

• ${component}-debug images include Delve debugger
• ${component}-snapshot images are published from the tip of the main branch for every commit, allowing testing unreleased versions
• ${component}-debug-snapshot snapshot images that include Delve debugger

There are orchestration templates for running Jaeger with:

• Kubernetes: github.com/jaegertracing/jaeger-kubernetes ,
• OpenShift: github.com/jaegertracing/jaeger-openshift .

Configuration Options

Jaeger binaries can be configured in a number of ways (in the order of decreasing priority):

• command line arguments,
• environment variables,
• configuration files in JSON, TOML, YAML, HCL, or Java properties formats.

To see the complete list of options, run the binary with help command or refer to the CLI Flags page for more information. Options that are specific to a certain storage backend are only listed if the storage type is selected. For example, to see all available options in the Collector with Cassandra storage:

$ docker run --rm \
    -e SPAN_STORAGE_TYPE=cassandra \
    jaegertracing/jaeger-collector:1.51.0 \
    help

In order to provide configuration parameters via environment variables, find the respective command line option and convert its name to UPPER_SNAKE_CASE, for example:

All-in-one

Jaeger all-in-one is a special distribution that combines three Jaeger components, agent, collector, and query service/UI, in a single binary or container image. It is useful for single-node deployments where your trace volume is light enough to be handled by a single instance. By default, all-in-one starts with memory storage, meaning it will lose all data upon restart. All other span storage backends can also be used with all-in-one, but memory and badger are exclusive to all-in-one because they cannot be shared between instances.

All-in-one listens to the same ports as the components it contains (described below), with the exception of the admin port.

## make sure to expose only the ports you use in your deployment scenario!
docker run -d --name jaeger \
  -e COLLECTOR_OTLP_ENABLED=true \
  -e COLLECTOR_ZIPKIN_HOST_PORT=:9411 \
  -p 5775:5775/udp \
  -p 6831:6831/udp \
  -p 6832:6832/udp \
  -p 5778:5778 \
  -p 16686:16686 \
  -p 14250:14250 \
  -p 14268:14268 \
  -p 14269:14269 \
  -p 4317:4317 \
  -p 4318:4318 \
  -p 9411:9411 \
  jaegertracing/all-in-one:1.51.0

You can navigate to http://localhost:16686 to access the Jaeger UI.

Agent

jaeger-agent is designed to receive tracing data in Thrift format over UDP and run locally on each host, either as a host agent / daemon or as an application sidecar. jaeger-agent exposes the following ports:

It can be executed directly on the host or via Docker, as follows:

## make sure to expose only the ports you use in your deployment scenario!
docker run \
  --rm \
  -p6831:6831/udp \
  -p6832:6832/udp \
  -p5778:5778/tcp \
  -p5775:5775/udp \
  jaegertracing/jaeger-agent:1.51.0

Discovery System Integration

jaeger-agents can connect point-to-point to a single jaeger-collector address, which could be load balanced by another infrastructure component (e.g. DNS) across multiple jaeger-collectors. jaeger-agent can also be configured with a static list of jaeger-collector addresses.

On Docker, a command like the following can be used:

docker run \
  --rm \
  -p5775:5775/udp \
  -p6831:6831/udp \
  -p6832:6832/udp \
  -p5778:5778/tcp \
  jaegertracing/jaeger-agent:1.51.0 \
  --reporter.grpc.host-port=jaeger-collector.jaeger-infra.svc:14250

When using gRPC, you have several options for load balancing and name resolution:

• Single connection and no load balancing. This is the default if you specify a single host:port. (example: --reporter.grpc.host-port=jaeger-collector.jaeger-infra.svc:14250)
• Static list of hostnames and round-robin load balancing. This is what you get with a comma-separated list of addresses. (example: reporter.grpc.host-port=jaeger-collector1:14250,jaeger-collector2:14250,jaeger-collector3:14250)
• Dynamic DNS resolution and round-robin load balancing. To get this behavior, prefix the address with dns:/// and gRPC will attempt to resolve the hostname using SRV records (for external load balancing ), TXT records (for service configs ), and A records. Refer to the gRPC Name Resolution docs  and the dns_resolver.go implementation  for more info. (example: --reporter.grpc.host-port=dns:///jaeger-collector.jaeger-infra.svc:14250)

Agent level tags

Jaeger supports agent level tags, that can be added to the process tags of all spans passing through jaeger-agent. This is supported through the command line flag --agent.tags=key1=value1,key2=value2,...,keyn=valuen. Tags can also be set through an environment flag like so - --agent.tags=key=${envFlag:defaultValue} - The tag value will be set to the value of the envFlag environment key and defaultValue if not set.

Collector

jaeger-collectors are stateless and thus many instances of jaeger-collector can be run in parallel. jaeger-collectors require almost no configuration, except for storage location, such as --cassandra.keyspace and --cassandra.servers options, or the location of Elasticsearch cluster, via --es.server-urls, depending on which storage is specified. See the CLI Flags for all command line options.

At default settings jaeger-collector exposes the following ports:

Ingester

jaeger-ingester is a service which reads span data from Kafka topic and writes it to another storage backend (Elasticsearch or Cassandra).

To view all exposed configuration options run the following command:

docker run \
  -e SPAN_STORAGE_TYPE=cassandra \
  jaegertracing/jaeger-ingester:1.51.0
  --help

Query Service & UI

jaeger-query serves the API endpoints and a React/Javascript UI. The service is stateless and is typically run behind a load balancer, such as NGINX .

At default settings the jaeger-query service exposes the following port(s):

Minimal deployment example (Elasticsearch backend):

docker run -d --rm \
  -p 16685:16685 \
  -p 16686:16686 \
  -p 16687:16687 \
  -e SPAN_STORAGE_TYPE=elasticsearch \
  -e ES_SERVER_URLS=http://<ES_SERVER_IP>:<ES_SERVER_PORT> \
  jaegertracing/jaeger-query:1.51.0

Clock Skew Adjustment

Jaeger backend combines trace data from applications that are usually running on different hosts. The hardware clocks on the hosts often experience relative drift, known as the clock skew effect . Clock skew can make it difficult to reason about traces, for example, when a server span may appear to start earlier than the client span, which should not be possible. jaeger-query service implements a clock skew adjustment algorithm (code ) to correct for clock drift, using the knowledge about causal relationships between spans. All adjusted spans have a warning displayed in the UI that provides the exact clock skew delta applied to its timestamps.

Sometimes these adjustments themselves make the trace hard to understand. For example, when repositioning the server span within the bounds of its parent span, Jaeger does not know the exact relationship between the request and response latencies, so it assumes then to be equal and places the child span in the middle of the parent span (see issue #961 ).

jaeger-query service supports a configuration flag --query.max-clock-skew-adjustment that controls how much clock skew adjustment should be allowed. Setting this parameter to zero (0s) disables clock skew adjustment completely. This setting applies to all traces retrieved from the given query service. There is an open ticket #197  to support toggling the adjustment on and off directly in the UI.

UI Base Path

The base path for all jaeger-query HTTP routes can be set to a non-root value, e.g. /jaeger would cause all UI URLs to start with /jaeger. This can be useful when running jaeger-query behind a reverse proxy.

The base path can be configured via the --query.base-path command line parameter or the QUERY_BASE_PATH environment variable.

UI Customization and Embedding

Please refer to the dedicated Frontend/UI page.

Remote Storage (component)

jaeger-remote-storage implements the Remote Storage gRPC API  and proxies it into one of the regular Jaeger backends. It can be useful in the situation when we want to run a full deployment of Jaeger components, e.g., separate collector and query services, but use a single-node storage backend like the memory store or Badger. Without the remote storage, the single-node backends can only be used with all-in-one since they cannot be shared between multiple processes.

At default settings the service listens on the following port(s):

Span Storage Backends

Jaeger requires a persistent storage backend. Cassandra and Elasticsearch/OpenSearch are the primary supported distributed storage backends. Additional backends are discussed here .

The storage type can be passed via SPAN_STORAGE_TYPE environment variable. Valid values are cassandra, elasticsearch, kafka (only as a buffer), grpc-plugin, badger and memory.

As of version 1.6.0, it’s possible to use multiple storage types at the same time by providing a comma-separated list of valid types to the SPAN_STORAGE_TYPE environment variable. It’s important to note that all listed storage types are used for writing, but only the first type in the list will be used for reading and archiving.

For large scale production deployment the Jaeger team recommends OpenSearch backend over Cassandra.

Memory

The in-memory storage is not intended for production workloads. It’s intended as a simple solution to get started quickly and data will be lost once the process is gone.

By default, there’s no limit in the amount of traces stored in memory but a limit can be established by passing an integer value via --memory.max-traces.

Badger - local storage

Since Jaeger 1.9

Badger  is an embedded local storage, only available with all-in-one distribution. By default, it acts as an ephemeral storage using a temporary file system. This can be overridden by using the --badger.ephemeral=false option.

docker run \
  -e SPAN_STORAGE_TYPE=badger \
  -e BADGER_EPHEMERAL=false \
  -e BADGER_DIRECTORY_VALUE=/badger/data \
  -e BADGER_DIRECTORY_KEY=/badger/key \
  -v <storage_dir_on_host>:/badger \
  -p 16686:16686 \
  jaegertracing/all-in-one:1.51.0

Upgrade Badger v1 to v3

In Jaeger 1.24.0, Badger is upgraded from v1.6.2 to v3.2103.0 which changes the underlying data format. Following steps will help in migrating your data:

1. In Badger v1, the data looks like:

❯ ls /tmp/badger/
data  key
❯ ls /tmp/badger/data/
000001.vlog  000004.vlog  000005.vlog  000008.vlog  000011.vlog  000012.vlog  000013.vlog  000014.vlog  000015.vlog  000016.vlog  000017.vlog
❯ ls /tmp/badger/key/
000038.sst  000048.sst  000049.sst  000050.sst  000051.sst  000059.sst  000060.sst  000061.sst  000063.sst  000064.sst  000065.sst  000066.sst  MANIFEST

2. Make a backup of your data directory to have a copy incase migration didn’t work successfully.

❯ cp -r /tmp/badger /tmp/badger.bk

3. Download, extract and compile the source code of badger v1: https://github.com/dgraph-io/badger/archive/refs/tags/v1.6.2.tar.gz 

❯ tar xvzf badger-1.6.2.tar
❯ cd badger-1.6.2/badger/
❯ go install

This will install the badger command line utility into your $GOBIN path eg ~/go/bin/badger.

4. Use badger utility to take backup of data.

❯ ~/go/bin/badger backup --dir /tmp/badger/key --vlog-dir /tmp/badger/data/
Listening for /debug HTTP requests at port: 8080
badger 2021/06/24 22:04:30 INFO: All 12 tables opened in 907ms
badger 2021/06/24 22:04:30 INFO: Replaying file id: 17 at offset: 64584535
badger 2021/06/24 22:04:30 INFO: Replay took: 12.303µs
badger 2021/06/24 22:04:30 DEBUG: Value log discard stats empty
badger 2021/06/24 22:04:30 INFO: DB.Backup Created batch of size: 9.7 kB in 75.907µs.
badger 2021/06/24 22:04:31 INFO: DB.Backup Created batch of size: 4.3 MB in 8.003592ms.
....
....
badger 2021/06/24 22:04:31 INFO: DB.Backup Created batch of size: 30 MB in 74.808075ms.
badger 2021/06/24 22:04:36 INFO: DB.Backup Sent 15495232 keys
badger 2021/06/24 22:04:36 INFO: Got compaction priority: {level:0 score:1.73 dropPrefixes:[]}

This will create a badger.bak file in the current directory.

5. Download, extract and compile the source code of badger v3: https://github.com/dgraph-io/badger/archive/refs/tags/v3.2103.0.tar.gz 

❯ tar xvzf badger-3.2103.0.tar
❯ cd badger-3.2103.0/badger/
❯ go install

This will install the badger command line utility into your $GOBIN path eg ~/go/bin/badger.

6. Restore the data from backup.

❯ ~/go/bin/badger restore --dir jaeger-v3
Listening for /debug HTTP requests at port: 8080
jemalloc enabled: false
Using Go memory
badger 2021/06/24 22:08:29 INFO: All 0 tables opened in 0s
badger 2021/06/24 22:08:29 INFO: Discard stats nextEmptySlot: 0
badger 2021/06/24 22:08:29 INFO: Set nextTxnTs to 0
badger 2021/06/24 22:08:37 INFO: [0] [E] LOG Compact 0->6 (5, 0 -> 50 tables with 1 splits). [00001 00002 00003 00004 00005 . .] -> [00006 00007 00008 00009 00010 00011 00012 00013 00014 00015 00016 00017 00018 00019 00020 00021 00022 00023 00024 00025 00026 00028 00029 00030 00031 00032 00033 00034 00035 00036 00037 00038 00039 00040 00041 00043 00044 00045 00046 00047 00048 00049 00050 00051 00052 00053 00054 00055 00056 00057 .], took 2.597s
badger 2021/06/24 22:08:53 INFO: Lifetime L0 stalled for: 0s
badger 2021/06/24 22:08:55 INFO:
Level 0 [ ]: NumTables: 00. Size: 0 B of 0 B. Score: 0.00->0.00 StaleData: 0 B Target FileSize: 64 MiB
Level 1 [ ]: NumTables: 00. Size: 0 B of 10 MiB. Score: 0.00->0.00 StaleData: 0 B Target FileSize: 2.0 MiB
Level 2 [ ]: NumTables: 00. Size: 0 B of 10 MiB. Score: 0.00->0.00 StaleData: 0 B Target FileSize: 2.0 MiB
Level 3 [ ]: NumTables: 00. Size: 0 B of 10 MiB. Score: 0.00->0.00 StaleData: 0 B Target FileSize: 2.0 MiB
Level 4 [B]: NumTables: 45. Size: 86 MiB of 10 MiB. Score: 8.64->10.21 StaleData: 0 B Target FileSize: 2.0 MiB
Level 5 [ ]: NumTables: 08. Size: 29 MiB of 34 MiB. Score: 0.00->0.00 StaleData: 0 B Target FileSize: 4.0 MiB
Level 6 [ ]: NumTables: 63. Size: 340 MiB of 340 MiB. Score: 0.00->0.00 StaleData: 0 B Target FileSize: 8.0 MiB
Level Done
Num Allocated Bytes at program end: 0 B

This will restore the data in jaeger-v3 directory. It will look like this

❯ ls ./jaeger-v3
000001.vlog  000180.sst  000257.sst  000276.sst  000294.sst  000327.sst  000336.sst  000349.sst  000356.sst  000364.sst  000371.sst  000378.sst  000385.sst  000392.sst  000399.sst  000406.sst  000413.sst   MANIFEST
000006.sst   000181.sst  000259.sst  000277.sst  000302.sst  000328.sst  000339.sst  000350.sst  000357.sst  000365.sst  000372.sst  000379.sst  000386.sst  000393.sst  000400.sst  000407.sst  000414.sst
000007.sst   000195.sst  000261.sst  000278.sst  000305.sst  000330.sst  000340.sst  000351.sst  000359.sst  000366.sst  000373.sst  000380.sst  000387.sst  000394.sst  000401.sst  000408.sst  000415.sst
000008.sst   000218.sst  000265.sst  000279.sst  000315.sst  000331.sst  000341.sst  000352.sst  000360.sst  000367.sst  000374.sst  000381.sst  000388.sst  000395.sst  000402.sst  000409.sst  000416.sst
000061.sst   000227.sst  000267.sst  000282.sst  000324.sst  000332.sst  000343.sst  000353.sst  000361.sst  000368.sst  000375.sst  000382.sst  000389.sst  000396.sst  000403.sst  000410.sst  000417.sst
000134.sst   000249.sst  000272.sst  000285.sst  000325.sst  000333.sst  000344.sst  000354.sst  000362.sst  000369.sst  000376.sst  000383.sst  000390.sst  000397.sst  000404.sst  000411.sst  DISCARD
000154.sst   000255.sst  000275.sst  000289.sst  000326.sst  000334.sst  000348.sst  000355.sst  000363.sst  000370.sst  000377.sst  000384.sst  000391.sst  000398.sst  000405.sst  000412.sst  KEYREGISTRY

7. Separate out the key and data directories.

❯ rm -rf /tmp/badger
❯ mv ./jaeger-v3 /tmp/badger
❯ mkdir /tmp/badger/data /tmp/badger/key
❯ mv /tmp/badger/*.vlog /tmp/badger/data/
❯ mv /tmp/badger/*.sst /tmp/badger/key/
❯ mv /tmp/badger/MANIFEST /tmp/badger/DISCARD /tmp/badger/KEYREGISTRY /tmp/badger/key/

8. Start Jaeger v1.24.0. It should start well.

Cassandra

Supported versions: 3.4+

Deploying Cassandra itself is out of scope for our documentation. One good source of documentation is the Apache Cassandra Docs .

Configuration

Minimal

docker run \
  -e SPAN_STORAGE_TYPE=cassandra \
  -e CASSANDRA_SERVERS=<...> \
  jaegertracing/jaeger-collector:1.51.0

Note: White space characters are allowed in CASSANDRA_SERVERS. For Example: Servers can be passed as `CASSANDRA_SERVERS=“1.2.3.4, 5.6.7.8” for better readability.

All options

To view the full list of configuration options, you can run the following command:

docker run \
  -e SPAN_STORAGE_TYPE=cassandra  \
  jaegertracing/jaeger-collector:1.51.0 \
  --help

Schema script

A script is provided to initialize Cassandra keyspace and schema using Cassandra’s interactive shell cqlsh :

MODE=test sh ./plugin/storage/cassandra/schema/create.sh | cqlsh

For production deployment, pass MODE=prod DATACENTER={datacenter} arguments to the script, where {datacenter} is the name used in the Cassandra configuration / network topology.

The script also allows overriding TTL, keyspace name, replication factor, etc. Run the script without arguments to see the full list of recognized parameters.

Note: See README  for more details on Cassandra schema management.

TLS support

Jaeger supports TLS client to node connections as long as you’ve configured your Cassandra cluster correctly. After verifying with e.g. cqlsh, you can configure the collector and query like so:

docker run \
  -e CASSANDRA_SERVERS=<...> \
  -e CASSANDRA_TLS=true \
  -e CASSANDRA_TLS_SERVER_NAME="CN-in-certificate" \
  -e CASSANDRA_TLS_KEY=<path to client key file> \
  -e CASSANDRA_TLS_CERT=<path to client cert file> \
  -e CASSANDRA_TLS_CA=<path to your CA cert file> \
  jaegertracing/jaeger-collector:1.51.0

The schema tool also supports TLS. You need to make a custom cqlshrc file like so:

# Creating schema in a cassandra cluster requiring client TLS certificates.
#
# Create a volume for the schema docker container containing four files:
# cqlshrc: this file
# ca-cert: the cert authority for your keys
# client-key: the keyfile for your client
# client-cert: the cert file matching client-key
#
# if there is any sort of DNS mismatch and you want to ignore server validation
# issues, then uncomment validate = false below.
#
# When running the container, map this volume to /root/.cassandra and set the
# environment variable CQLSH_SSL=--ssl
[ssl]
certfile = ~/.cassandra/ca-cert
userkey = ~/.cassandra/client-key
usercert = ~/.cassandra/client-cert
# validate = false

Elasticsearch

• Supported since Jaeger v0.6.0
• Supported ES versions: 5.x, 6.x, 7.x
  • 8.x support is coming soon . Meanwhile, there is a manual workaround .

Elasticsearch version is automatically retrieved from root/ping endpoint. Based on this version Jaeger uses compatible index mappings and Elasticsearch REST API. The version can be explicitly provided via --es.version= flag.

Elasticsearch does not require initialization other than installing and running Elasticsearch . Once it is running, pass the correct configuration values to the Jaeger collector and query service.

Configuration

Minimal

docker run \
  -e SPAN_STORAGE_TYPE=elasticsearch \
  -e ES_SERVER_URLS=<...> \
  jaegertracing/jaeger-collector:1.51.0

All options

To view the full list of configuration options, you can run the following command:

docker run \
  -e SPAN_STORAGE_TYPE=elasticsearch \
  jaegertracing/jaeger-collector:1.51.0 \
  --help

Shards and Replicas for Elasticsearch indices

Shards and replicas are some configuration values to take special attention to, because this is decided upon index creation. This article  goes into more information about choosing how many shards should be chosen for optimization.

Elasticsearch Rollover

Elasticsearch rollover  is an index management strategy that optimizes use of resources allocated to indices. For example, indices that do not contain any data still allocate shards, and conversely, a single index might contain significantly more data than the others. Jaeger by default stores data in daily indices which might not optimally utilize resources. Rollover feature can be enabled by --es.use-aliases=true.

Rollover lets you configure when to roll over to a new index based on one or more of the following criteria:

• max_age - the maximum age of the index. It uses time units : d, h, m.
• max_docs - the maximum documents in the index.
• max_size - the maximum estimated size of primary shards (since Elasticsearch 6.x). It uses byte size units  tb, gb, mb.

Rollover index management strategy is more complex than using the default daily indices and it requires an initialization job to prepare the storage and two cron jobs to manage indices.

To learn more about rollover index management in Jaeger refer to this article .

For automated rollover, please refer to Elasticsearch ILM support.

Initialize

The following command prepares Elasticsearch for rollover deployment by creating index aliases, indices, and index templates:

docker run -it --rm --net=host jaegertracing/jaeger-es-rollover:latest init http://localhost:9200 # <1>

If you need to initialize archive storage, add -e ARCHIVE=true.

After the initialization Jaeger can be deployed with --es.use-aliases=true.

Rolling over to a new index

The next step is to periodically execute the rollover API which rolls the write alias to a new index based on supplied conditions. The command also adds a new index to the read alias to make new data available for search.

docker run -it --rm --net=host -e CONDITIONS='{"max_age": "2d"}' jaegertracing/jaeger-es-rollover:latest rollover  http://localhost:9200 # <1>

<1> The command rolls the alias over to a new index if the age of the current write index is older than 2 days. For more conditions see Elasticsearch docs .

The next step is to remove old indices from read aliases. It means that old data will not be available for search. This imitates the behavior of --es.max-span-age flag used in the default index-per-day deployment. This step could be optional and old indices could be simply removed by index cleaner in the next step.

docker run -it --rm --net=host -e UNIT=days -e UNIT_COUNT=7 jaegertracing/jaeger-es-rollover:latest lookback  http://localhost:9200 # <1>

<1> Removes indices older than 7 days from read alias.

Remove old data

The historical data can be removed with the jaeger-es-index-cleaner that is also used for daily indices.

docker run -it --rm --net=host -e ROLLOVER=true jaegertracing/jaeger-es-index-cleaner:latest 14 http://localhost:9200 # <1>

<1> Remove indices older than 14 days.

Elasticsearch ILM support

For example:

• Rollover to a new index by size (bytes or number of documents) or age, archiving previous indices
• Delete stale indices to enforce data retention standards

Enabling ILM support

• Create an ILM policy in elasticsearch named jaeger-ilm-policy.

  For example, the following policy will rollover the “active” index when it is older than 1m and delete indices that are older than 2m.

  curl -X PUT http://localhost:9200/_ilm/policy/jaeger-ilm-policy \
  -H 'Content-Type: application/json; charset=utf-8' \
  --data-binary @- << EOF
  {
    "policy": {
      "phases": {
        "hot": {
          "min_age": "0ms",
          "actions": {
            "rollover": {
              "max_age": "1m"
            },
            "set_priority": {
              "priority": 100
            }
          }
        },
        "delete": {
          "min_age": "2m",
          "actions": {
            "delete": {}
          }
        }
      }
    }
  }
  EOF
  

• Run elasticsearch initializer with ES_USE_ILM=true:

  docker run -it --rm --net=host -e ES_USE_ILM=true jaegertracing/jaeger-es-rollover:latest init http://localhost:9200 # <1>
  

  <1> If you need to initialize archive storage, add -e ARCHIVE=true.

  While initializing with ILM support, make sure that an ILM policy named jaeger-ilm-policy is created in Elasticsearch beforehand (see the previous step), otherwise the following error message will be shown:

  “ILM policy jaeger-ilm-policy doesn’t exist in Elasticsearch. Please create it and rerun init”

  After the initialization, deploy Jaeger with --es.use-ilm=true and --es.use-aliases=true.

Upgrade Elasticsearch version

Elasticsearch defines wire and index compatibility versions. The index compatibility defines the minimal version a node can read data from. For example Elasticsearch 7 can read indices created by Elasticsearch 6, however it cannot read indices created by Elasticsearch 5 even though they use the same index mappings. Therefore upgrade from Elasticsearch 6 to 7 does not require any data migration. However, upgrade from Elasticsearch 5 to 7 has to be done through Elasticsearch 6 and wait until indices created by ES 5.x are removed or explicitly reindexed.

Refer to the Elasticsearch documentation  for wire and index compatibility versions. Generally this information can be retrieved from root/ping REST endpoint.

Reindex

Manual reindexing can be used when upgrading from Elasticsearch 5 to 7 (through Elasticsearch 6) without waiting until indices created by Elasticsearch 5 are removed.

1. Reindex all span indices to new indices with suffix -1:

   curl -ivX POST -H "Content-Type: application/json" http://localhost:9200/_reindex -d @reindex.json
   {
     "source": {
       "index": "jaeger-span-*"
     },
     "dest": {
       "index": "jaeger-span"
     },
     "script": {
       "lang": "painless",
       "source": "ctx._index = 'jaeger-span-' + (ctx._index.substring('jaeger-span-'.length(), ctx._index.length())) + '-1'"
     }
   }
   

2. Delete indices with old mapping:

   curl -ivX DELETE -H "Content-Type: application/json" http://localhost:9200/jaeger-span-\*,-\*-1
   

3. Create indices without -1 suffix:

   curl -ivX POST -H "Content-Type: application/json" http://localhost:9200/_reindex -d @reindex.json
   {
     "source": {
       "index": "jaeger-span-*"
     },
     "dest": {
       "index": "jaeger-span"
     },
     "script": {
       "lang": "painless",
       "source": "ctx._index = 'jaeger-span-' + (ctx._index.substring('jaeger-span-'.length(), ctx._index.length() - 2))"
     }
   }
   

4. Remove suffixed indices:

   curl -ivX DELETE -H "Content-Type: application/json" http://localhost:9200/jaeger-span-\*-1
   

Run the commands analogically for other Jaeger indices.

There might exist more effective migration procedure. Please share with the community any findings.

Kafka

Supported in Jaeger since 1.6.0 Supported Kafka versions: 0.9+

Kafka can be used as an intermediary buffer between collector and an actual storage. jaeger-collector is configured with SPAN_STORAGE_TYPE=kafka that makes it write all received spans into a Kafka topic. jaeger-ingester is used to read from Kafka and store spans in another storage backend (Elasticsearch or Cassandra).

Writing to Kafka is particularly useful for building post-processing data pipelines.

Configuration

Minimal

docker run \
  -e SPAN_STORAGE_TYPE=kafka \
  -e KAFKA_PRODUCER_BROKERS=<...> \
  -e KAFKA_TOPIC=<...> \
  jaegertracing/jaeger-collector:1.51.0

All options

To view the full list of configuration options, you can run the following command:

docker run \
  -e SPAN_STORAGE_TYPE=kafka \
  jaegertracing/jaeger-collector:1.51.0 \
  --help

Topic & partitions

Unless your Kafka cluster is configured to automatically create topics, you will need to create it ahead of time. You can refer to the Kafka quickstart documentation  to learn how.

You can find more information about topics and partitions in general in the official documentation . This article  provide more details about how to choose the number of partitions.

Storage plugin

Jaeger supports a gRPC-based Remote Storage API  that allows extending the Jaeger ecosystem with other storage backends, or “plugins”, not directly supported by the project. These storage backends can be deployed in two modes: as a sidecar or as a remote gRPC server (since Jaeger v1.30).

To use a storage plugin as Jaeger storage backend, use grpc-plugin as the storage type and specify either the binary name for the sidecar mode, or the remote gRPC server address. For more information, please refer to jaeger/plugin/storage/grpc .

Sidecar model

In the sidecar model, the backend server that implements the Remote Storage API runs as a child process of some Jaeger component (the Hashicorp go-plugin model ).

Example:

docker run \
  -e SPAN_STORAGE_TYPE=grpc-plugin \
  -e GRPC_STORAGE_PLUGIN_BINARY=<...> \
  -e GRPC_STORAGE_PLUGIN_CONFIGURATION_FILE=<...> \
  jaegertracing/all-in-one:1.51.0

Available sidecar plugins:

• InfluxDB  - time series database.
• Logz.io  - secure, scalable, managed, cloud-based ELK storage.
• ClickHouse  - fast open-source OLAP DBMS.

Compatible Backends

• ScyllaDB can be used  as a drop-in replacement for Cassandra since it uses the same data model and query language.

Remote storage model

In the remote storage model the backend server runs as a separate process, and the Jaeger components are configured to talk to it over gRPC.

Example:

docker run \
  -e SPAN_STORAGE_TYPE=grpc-plugin \
  -e GRPC_STORAGE_SERVER=<...> \
  jaegertracing/all-in-one:1.51.0

Known remote storage backends:

• N/A

Metrics Storage Backends

Jaeger Query is capable of querying aggregated R.E.D metrics from a storage backend, visualizing them on the Monitor tab. It should be emphasized that the configured metrics storage type is for reading only and therefore, only applies to the Jaeger Query component (and All In One, which contains Jaeger Query).

The storage type can be passed via METRICS_STORAGE_TYPE environment variable. Valid values are: prometheus.

Prometheus

Any PromQL-compatible backend is supported by Jaeger Query. A list of these have been compiled by Julius Volz in: https://promlabs.com/blog/2020/11/26/an-update-on-promql-compatibility-across-vendors 

Configuration

Minimal

docker run \
  -e METRICS_STORAGE_TYPE=prometheus \
  jaegertracing/jaeger-query:1.51.0

All options

To view the full list of configuration options, you can run the following command:

docker run \
  -e METRICS_STORAGE_TYPE=prometheus \
  jaegertracing/jaeger-query:1.51.0 \
  --help

TLS support

Jaeger supports TLS client to Prometheus server connections as long as you’ve configured your Prometheus server  correctly. You can configure jaeger-query like so:

docker run \
  -e METRICS_STORAGE_TYPE=prometheus \
  -e PROMETHEUS_SERVER_URL=<...> \
  -e PROMETHEUS_TLS_ENABLED=true \
  -e PROMETHEUS_TLS_CA=<path to your CA cert file> \
  jaegertracing/jaeger-query:1.51.0

Aggregation Jobs for Service Dependencies

Production deployments need an external process which aggregates data and creates dependency links between services. Project spark-dependencies  is a Spark job which derives dependency links and stores them directly to the storage.